Stainless Steel PreSwaged Wire Kits with Lag Screws (available from $13.00)

• Fittings Hydraulically pressed  & wires made to length.
• Excellent for all areas of up to approx. 10 metres.
• All we need is measurements from inside post to inside post and the wires will be made professionally for you to install.

Kit Includes:

• 1 x Stainless Steel Jaw Swage rigging Turnbuckle 3.2mm     (hydraulically pressed on to the wire)
  
• 1 x Stainless Steel Fork Terminal 3.2mm                              (hydraulically pressed onto the wire)
  
• 2 x Stainless Steel Lag Screws.                                            ( screw into timber posts then attach Preswaged wires)              
  

All that is needed is for you to purchase the amount of wire required. 

We recommend that you use the 3.2mm 1x19 wire with these kits. This wire is a stiffer stronger wire that has limited flexibilty & stretch. This also is the best looking wire used in Balustrading.

Installation:

Easy to install.

Simply screw in Lag screws into end posts attached the wires to lag screws then tension up the turnbuckle.

If you have any posts where the wire will pass thru you will need to drill a 8.5mm hole. These holes can be filled using the Nylon Grommets.

Ask for a quote today

email: sales@shanesstainless.com.au
mobile: 0401 211 929 - Shane
mobile: 0423 309 184 - Reece